Home » Shop » Hi Tech 40A 2-Pole Manual Changeover Switch (1-0-2) for Mains & Generator, HC-240
Enova Smart Battery Charger 30A (12V/24V) PWM solar charge controller (smart battery charger)
Enova Smart Battery Charger 30A, PWM Solar Charge Controller 12V/24V with LCD and USB Original price was: ₨ 5,500.Current price is: ₨ 4,300.
Back to products
Hi Tech HC-263 Manual changeover switch
Hi Tech 63A Changeover Switch 2-Pole 1-0-2 for Mains & Generator (HC-263) Original price was: ₨ 2,800.Current price is: ₨ 2,200.

Hi Tech 40A 2-Pole Manual Changeover Switch (1-0-2) for Mains & Generator, HC-240

Original price was: ₨ 1,700.Current price is: ₨ 1,350.

The Hi Tech HC-240 is a manual 40A 2-pole changeover switch with a 1-0-2 rotary knob. Turn it to 1 or 2 to pick between two supplies, like your mains and a generator, and leave it at 0 to cut both. It’s rated up to 690V and the box lists 99.5% copper contact parts. You mount it on a panel or board and switch by hand.

کیش آن ڈیلیوری (COD) آرڈر کے لیے، ڈلیوری چارجز پہلے ادا کرنے ہوں گے۔ آپ کی ادائیگی کی تصدیق ہوتے ہی آرڈر بھیج دیا جائے گا۔

کیش آن ڈیلیوری (COD) آرڈر کے لیے، ڈلیوری چارجز پہلے ادا کرنے ہوں گے۔ آپ کی ادائیگی کی تصدیق ہوتے ہی آرڈر بھیج دیا جائے گا۔

Hi Tech 40A 2-Pole Manual Changeover Switch (1-0-2) for Mains & Generator, HC-240

Original price was: ₨ 1,700.Current price is: ₨ 1,350.

Original price was: ₨ 1,700.Current price is: ₨ 1,350.

100 People watching this product now!

Product Highlights

BrandHi Tech
ModelHC-240
Rating40A 2-pole

The Hi Tech HC-240 is a manual 40A 2-pole changeover switch with a 1-0-2 rotary knob. Turn it to 1 or 2 to pick between two supplies, like your mains and a generator, and leave it at 0 to cut both. It’s rated up to 690V and the box lists 99.5% copper contact parts. You mount it on a panel or board and switch by hand.

Payment Methods:

payment system
⚡ 40A 2-pole

Hi Tech HC-240 Manual changeover switch

Manual 40A 2-pole switch to move between mains and generator

🔀 Two-way switching⏹️ Off in the middle🔩 Copper contacts🖐️ Manual operation
Hi Tech HC-240 Manual changeover switch

The Hi Tech HC-240 changeover switch gives you one knob to choose which supply runs your circuit. It’s a 40A, 2-pole unit with a 1-0-2 layout, so you can sit on supply 1, switch fully off at 0, or move to supply 2 without touching the wiring.

🔀

Two-way switching

Move your circuit between mains and a generator, or between any two supplies, with one turn of the knob.

⏹️

Off in the middle

The center 0 position breaks both sides, so nothing stays live while you change over.

🔩

Copper contacts

The box lists 99.5% copper parts, which helps the contacts carry 40A without heating up quickly.

🖐️

Manual operation

You turn it by hand. There’s no automatic transfer and nothing electronic to fail.

A closer look

Terminals marked R/L1 and S/L2 for the two incoming supplies, with U/T1 and V/T2 going out to the load.
Terminals marked R/L1 and S/L2 for the two incoming supplies, with U/T1 and V/T2 going out to the load.
Screw terminals on copper busbars that tighten down for a firm connection at 40A.
Screw terminals on copper busbars that tighten down for a firm connection at 40A.

Specifications

Specification Detail
Brand Hi Tech
Model / code HC-240
Type Manual rotary changeover switch (cam type)
Positions 1 – 0 – 2 (supply 1 / off / supply 2)
Rated current 40A
Poles 2-pole (2P)
Rated voltage Up to 690V AC
Contact material 99.5% copper (per box)
Terminals R/L1, S/L2 in; U/T1, V/T2 out
Mounting Panel / surface mount
Operation Manual, turned by hand
In the box 1 unit

Good to know

A changeover switch lets you pick which supply feeds your circuit without rewiring each time. Here’s where a 40A 2-pole unit like this fits.

  • Switching a house or shop between WAPDA mains and a generator
  • Moving a load between two separate supply lines
  • Fully isolating a circuit by turning to the 0 position
  • Single-phase or two-wire loads up to about 40A
  • Panel or board mounting where you want a clear hand switch

This is a manual switch, so someone has to turn the knob to change supply. It won’t start the generator or switch over on its own. For loads above 40A, use a higher-rated changeover.

In the box

  • 1 x Hi Tech HC-240 changeover switch
  • Retail box

Why it’s worth having

  • Rated for 40A across 2 poles, enough for many home and shop loads
  • Center 0 position lets you break both supplies before switching
  • The 1-0-2 layout makes it clear which supply is live
  • Box states 99.5% copper contact parts for better current carrying
  • Simple manual design with nothing electronic to go wrong

Order now for delivery across Pakistan.

Order on WhatsApp · 0341 3489181

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Copyright @ Ali Electric Store 2026. All Rights Reserved